1、招標條件
項目概況:5套注水泵橇（往復式）安裝在HZ19-6DPPA平臺的底層甲板。
資金到位或資金來源落實情況:已落實
項目已具備招標條件的說明:已具備
2、招標內容
招標項目編號:0704-2540JDCP5594
招標項目名稱:有限深圳-惠州25-4油田綜合調整/惠州19-6油田5d井區開發項目往復式注水泵
項目實施地點:中國廣東省
招標產品列表(主要設備):
| 序號 | 產品名稱 | 數量 | 簡要技術規格 | 備注 |
| 1 | 注水泵橇（往復式） | 5套 | 往復式注水泵，排量60m3/h，吸入壓力41~51kPaG，排出壓力26500kPaG |
3、投標人資格要求
投標人應具備的資格或業績:對投標人的資格和業績要求：
Requirements for Qualification and reference of Bidder:
（1）資格要求
Requirements for Qualification of Bidder
A.★制造商要求:
所投注水泵（往復式）為境內產品：投標人需是注水泵（往復式）的制造商。
所投注水泵（往復式）為境外產品：允許注水泵（往復式）的制造商或取得注水泵（往復式）制造商唯一授權的成撬商或代理商投標。
一個制造商對同一品牌同一型號的注水泵（往復式），僅能委托一個成橇商或代理商參加投標。
投標人為代理商或成撬商時，應得到本次投標注水泵（往復式）制造商的唯一合法授權，并需在投標時提供以下材料（制造商代表簽字或蓋制造商代表人名章或蓋制造商公章）：
1）在有效期內注水泵（往復式）制造商唯一授權書原件。對于投標文件中提供制造商授權書的中標候選人，中標候選人公示期間將公示其制造商授權信息。投標文件中提供制造商授權書的中標候選人應在中標候選人公示后3個工作日內將制造商授權書原件（簽字或人名章或公章均須為原件，不接受掃描打印文件）送達招標人聯系人進行核驗，對于國外制造商授權書原件，建議投標人提前準備以滿足核驗原件期限要求。投標文件中提供的制造商授權書可在制造商官方網站上查詢并核驗一致的或紙質投標已遞交制造商授權書原件的，可免于送交原件核驗。核驗結果不一致的，將按照提供虛假投標資料處理；未能在規定期限內提供原件的，將視為不如實提供材料處理。上述兩類情況將取消中標候選人資格及中標資格，并按照中國海油相關制度規定給予禁用等處理；
2）注水泵（往復式）制造商提供承諾函（格式自擬），承諾投標所投產品為制造商工廠生產。
A. ★Manufacturer requirement:
Water Injection Pumps (Reciprocating) Offered from within the PRC Customs Territory: Bidders must be the manufacturer of the Water Injection Pumps (Reciprocating).
Water Injection Pumps (Reciprocating) Offered from within the PRC Customs Territory: The manufacturer of the Water Injection Pumps (Reciprocating) or the sole authorized contractor or agent of the Water Injection Pumps (Reciprocating) manufacturer is allowed to bid.
A manufacturer can only appoint one skidder or agent to participate in the bidding for the same brand and model of the Water Injection Pump (Reciprocating).
When the bidder is an agent or contractor, they shall obtain the sole legal authorization of the manufacturer of the water injection pump (reciprocating) for this bidding, and shall provide the following materials at the time of bidding (signed by the manufacturer's representative or stamped with the manufacturer's representative's name seal or official seal):
1) The original of the sole authorization letter from the manufacturer of the Water Injection Pumps (Reciprocating) within the validity period. For successful candidates that provide a manufacturer's authorization in the bidding documents, information on their manufacturer's authorization will be made available during the public announcement of the successful candidate. The successful candidate who provides the manufacturer's authorization in the bidding document shall send the original manufacturer's authorization(Signature, personal seal or official seal must be original, scanned and printed documents are not accepted)to the contact person of the bidder for verification within 3 working days after the announcement of the successful candidate, for the original of the manufacturer's authorization provided in the bidding document for foreign manufacturers, it is recommended that the bidder prepare in advance in order to satisfy the deadline for verification of the original. The manufacturer's authorization provided in the bidding documents can be checked on the manufacturer's official website and verify the consistency of the paper bid has been submitted to the original manufacturer's authorization, can be exempted from sending the original verification. Any inconsistency in verification results will be handled in accordance with the provision of false bidding information; failure to provide the original within the specified period will be regarded as untrue provision of materials. The above two types of cases will cancel the qualification of the winning candidate and the qualification of the winning bid, and will be dealt with in accordance with the provisions of the relevant system of CNOOC, such as disablement;
2) The manufacturer of the water injection pump (reciprocating) shall provide a commitment letter (in a self drafted format), promising that the products submitted for bidding will be produced by the manufacturer's factory.
B.★中國境內投標人應承諾往復泵在其品牌制造廠生產，同時承諾在供貨時提供產品原產地證明。招標人不接受貼牌產品；
B.★The domestic BIDDER should promise the reciprocating pumps are produced in its brand own manufactory. And overseas BIDDER promise to provide certificate of origin. The Purchaser does not accept the OEM product;
C.★營業執照：如果投標人為境內注冊公司，投標人需提供合法有效的企業法人營業執照、稅務登記證及組織機構代碼證或證照合一的營業執照；
如果投標人為境外注冊公司，需提供有效的公司登記注冊證明；
C.★Business licence: The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;
The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.
D.★投標人所投產品的制造商須具備有效的GB/T19001或ISO9001質量體系認證證書，國內認證機構簽發的證書應可在中國國家認證認可監督管理委員會網站(http://www.dlztb.com/file/upload/zbwj/goudian/03211809044>D. ★The manufacturer of the bid products shall have valid GB/T19001 or ISO9001 quality system certification, and the certificates issued by domestic certification bodies can be verified on the website of Certification and Accreditation Administration of China (http://www.dlztb.com/file/upload/zbwj/goudian/03211809055>
E. ★是否接受聯合體投標：否
E. ★Joint Venture: Not Accepted
F. 未領購招標文件是否可以參加投標：不可以
F. Bid without the bidding documents: NOT Available
（2）★資質要求及證明文件
Requirements of Qualification of Bidder and Certificate
注水泵（往復式）的設計和制造需滿足API674標準（最新版），并且注水泵制造商廠家需在投標時提供有效的API Q1證書，且可以在官網（https://mycerts.api.org/Search/CompositeSearch）核實。
The design and manufacturing of the water injection pump (reciprocating) must comply with the latest version of API674 standard, and the manufacturer of the water injection pump must provide a valid API Q1 certificate at the time of bidding, which can be found on the official website（ https://mycerts.api.org/Search/CompositeSearch ）Verify.
（3）★業績要求Requirement for Bidder's reference:
投標人需滿足以下所有要求：
The Bidder needs to meet all below requirements:
1. 2014年1月1日至投標截止日（以合同簽署時間為準），投標人所投產品的制造商或成撬商應具有至少2個合同的注水泵(往復式)的供貨業績，且均滿足：⑴泵設計和制造滿足API674最新版標準；⑵泵排量不小于60m3/h；⑶泵出口壓力不小于26500kPaG；⑷海水介質工況。投標人提供的業績合同若非制造商直接簽訂，但合同中的往復式注水泵的制造商與本次所投產品中往復式注水泵的制造商一致，也予以認可。
1.From January 1, 2014 to the bid deadline date (subject to the contract signing time), the manufacturer or skid manufacturer of the bidder's bid products shall have at least 2 contracts of water injection pump (reciprocating) and its supporting system supply performance, and meet the following requirements: (1) pump design and manufacturing meet the latest version of API674 standards; (2) Pump displacement is not less than 60m3/h; (3) Pump outlet pressure is not less than 26500kPaG; (4) Performance requirements under seawater medium. If the performance contract provided by the bidder is not directly signed by the manufacturer, but the manufacturer of the Water Injection Pumps (Reciprocating) in the contract is consistent with the manufacturer of the Water Injection Pumps (Reciprocating) in the invested product, it is also recognized.
2.投標人須按規定格式提交業績表，并提交相關業績證明文件。業績證明文件包括：1）銷售合同和2）用戶簽字或蓋章的到貨驗收材料（到貨驗收單或調試驗收報告或其他可以證明合同項下貨物已經到貨驗收的有效證明材料）。投標人所提交的業績證明文件必須至少體現以下內容：合同簽署時間、合同簽署頁（國內貿易合同應有雙方蓋章，國際貿易合同應有雙方簽字或蓋章）、制造商名稱、貨物名稱、泵設計和制造標準、泵排量、泵出口壓力、輸送介質、用戶簽字或蓋章的到貨驗收材料。
未提交業績證明文件，或通過所提供的業績證明文件無法認定滿足上述業績要求的，均視為無效業績。
2. The bidder shall submit the performance table in the prescribed format, and submit the relevant performance certification documents. Performance proof documents include: 1) Sales contract and 2) arrival acceptance materials signed or sealed by the user (arrival acceptance sheet or debugging acceptance report or other effective certification materials that can prove that the goods under the contract have arrived for acceptance). The performance documents submitted by the bidder must at least reflect the following contents: Contract signing time, contract signing page (domestic trade contracts should be sealed by both parties, international trade contracts should be signed or sealed by both parties), manufacturer name, goods name, pump design and manufacturing standards, pump displacement, pump outlet pressure, transport medium, user signature or stamped arrival acceptance materials.
Failure to submit performance documentation, or through the performance documentation provided cannot be determined to meet the above performance requirements, shall be regarded as invalid performance.
是否接受聯合體投標:不接受
未領購招標文件是否可以參加投標:不可以
4、招標文件的獲取
招標文件領購開始時間:2025-03-21
招標文件領購結束時間:2025-03-28
是否在線售賣標書:否
獲取招標文件方式:現場領購
招標文件領購地點：有興趣的投標人可通過以下方式獲取招標文件：從2025年3月21日開始至2025年3月28日止，請登錄中國海油采辦業務管理與交易系統(https://buy.cnooc.com.cn）的招標公告頁面進行購買。首次登錄必須先進行注冊（免費），注冊成功后，方可購買招標文件。投標人須在線填寫購買招標文件登記表，并在線支付標書款，支付成功后，投標人可自行下載招標文件。
招標文件售價:￥200/$30
其他說明:招標文件每套售價為200元人民幣或30美元，售后不退。招標文件發售費用用于印刷和郵寄招標文件/資格預審文件，有郵寄需求的請在支付時備注收件人相關信息。對于使用美元購買招標文件的投標人，需電匯至以下賬號：收款人：中化建國際招標有限責任公司，收款行名稱：INDUSTRIAL AND COMMERCIAL BANK OF CHINA,Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch，收款人賬號：0200000709117000351，SWIFT CODE: ICBKCNBJBJM，收款行地址：No. 237 Wang fu jing Street, Dong cheng District, Beijing, China PR: 100006。
5、投標文件的遞交
投標截止時間（開標時間）:2025-04-11 09:00
投標文件送達地點:北京市朝陽區東三環北路甲2號京信大廈29層
開標地點:北京市朝陽區東三環北路甲2號京信大廈29層
6、聯系方式
招標人:中海石油（中國）有限公司
地址:深圳市南山區后海濱路（深圳灣段）3168號中海油大廈A座3706辦公室？？？
聯系人:葉子朝
聯系方式:+86 18127097896
招標代理機構:中化建國際招標有限責任公司
地址:北京市東城區東直門外小街6號海油大廈4層
聯系人:敖鳳鳴
聯系方式:+86 010-84527962
7、匯款方式:
招標代理機構開戶銀行(人民幣):
招標代理機構開戶銀行(美元):
賬號(人民幣):
賬號(美元):